[Tinyos-help] Reg:transmission power control for preamble

Alex Chih Hu huzhi20060302 at gmail.com
Wed Nov 17 00:17:19 PST 2010


Or, using "#define CC2420_DEF_RFPOWER 1".

2010/11/15 manish chaturvedi <msc.nit at gmail.com>

> Hi,
>
> For setting  transmit power for each packet separately,  You can use
> CC2420Packet interface provided by CC2420PacketC.
> and use the function setPower of the interface.
>
>     call CC2420Packet.setPower(&pkt,31);//set the output power to max i.e 0
> dBm
>
> Refer to CC2420 data sheet for various tranmit power values.
>
> Hope this helps..
>
> Regards
> Manish..
>
>
> On
>
>
>
>         components CC2420PacketC;
>         App.CC2420Packet -> CC2420PacketC;
> in your configuration file
>
>         uses interface CC2420Packet;
>
>
>   On Mon, Nov 15, 2010 at 11:58 AM, SHIVASANKAR GANESAN <
> tatag4u at yahoo.co.in> wrote:
>
>>    Hi
>>
>> How to control transmission power for the preamble(in MICAZ mote).
>>          **
>> *With regards*
>>  *Sivasankar*
>>
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> Tinyos-help at millennium.berkeley.edu
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20101117/46304857/attachment.htm 


More information about the Tinyos-help mailing list