[Tinyos-help] How to restart RF230 in program

Miklos Maroti mmaroti at math.u-szeged.hu
Wed Feb 18 01:09:42 PST 2009


Hi Para,

initRadio is called only once at power up. SplitControl stop/start
puts the radio into sleep mode (lowest power) or active mode.

Miklos

2009/2/18 Para Lee <paradisove at gmail.com>:
> Hi all,
>
>
>
> We want to restart the RF230 when program is running, and we use a timer to
> control it. When the timer fired, we stop the RF230 by SplitControl
> interface and then restart it. To observe it easily, we also put some Leds
> in \tinyos-2.x\tos\chips\rf230\RF230LayerP, initRadio(). In my opinion, when
> the RF230 restart, it will run initRadio() and the Leds will toggle.
> Unfortunately, we didn't see any leds toggle.
>
> So is there anybody could tell me how to solve this problem?
>
> Many THX!
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>


More information about the Tinyos-help mailing list