[Tinyos-help] MDA100 or MDA300 ?
mbaleri at xbow.com
Fri Feb 29 09:25:34 PST 2008
If the ECH2O sensor requires 3V excitation and puts out 0-3V DC output,
then you should be able to connect it to MDA100.
If it requires 5V excitation, then your options are to use it with
MDA300 or MDA320.
I hope that helps,
From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Sent: Friday, February 29, 2008 7:49 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] MDA100 or MDA300 ?
I have to connect an external sensor (ech2o probes for measuring the
soil moisture) to a mote, but I don't know if this is possible with
MDA100 boards. To use these probes, I have to send an excitation on a
specified pin, and receive the analog output on an other pin. Some
people have done this using MDA300 boards, but I would like to know if
this is also feasible with MDA100.
Thanks in advance!
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Tinyos-help