[Tinyos-help] Regarding MDA300CA

Siirtola Harri Harri.Siirtola at vtt.fi
Wed Feb 27 01:49:09 PST 2008


Have you tried with MDA300 apps by Crossbow? They should work. If you
get decent readings with them, you can dig into the code to see what
goes wrong with your own app.

Regards,

	Harri

-----Original Message-----
From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Coalton Bennett
Sent: Wednesday, February 27, 2008 12:30 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] Regarding MDA300CA

I have, since my last post--"Regarding ADC"--on February 21st, tried
other channels available on the ADC, however this hasn't solved the
problem. If anyone is proficient with TinyOS and could take a look at my
code I would greatly appreciate it. I am getting samples from the
MDA300CA but they are always the exact same values. The setup is the
same as the one presented in my previous post. Are there any specific
instructions that I need to follow, or should consider, when connecting
my circuit to the MDA300CA? As was stated in the previous post it is
just a 1.5V AA battery which I have connected to the MDA300CA so it
should be reading a constant value, but for some reason it isn't. Any
help would be greatly appreciated. I need results...and fast. Thanks in
advanced all.

C.B. 
_______________________________________________
Tinyos-help mailing list
Tinyos-help at millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help



More information about the Tinyos-help mailing list