[Tinyos-help] Error: No such file or directory -> /dev/ttyS3

Michael Schippling schip at santafe.edu
Sun Feb 10 11:38:21 PST 2008


Have you got the MIB plugged directly to a serial port
or are you using a USB adapter? In either case make sure
you have the cabling correct and the power on to the MIB.

If you are using windows...you can check the available port IDs
in the Device Manager. Note that the USB port ID changes when
you use a different hub so double check everything.

You also seem to have something overriding your explicit port selections
as it is always complaining about ttyS3 even when you try to spec
some other device on the command line. Under T1 I set the port in
the MakeLocal file like this:

     DEFAULT_PROGRAM=mib510
     MIB510=/dev/ttyS4

MS


Nicole Caruso wrote:
> It seems like whatever I do,
> Error: No such file or directory  -> /dev/ttyS3
> appears, even if I try to use a different device, like /dev/ttyS0.  The 
> device name is not being updated.  Do you know why?  Am I missing a 
> file, which I may have accidentally deleted?
> 
> 
> 
> 
> 
> 
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ make mica2 reinstall mib510,/dev/tty0
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ make mica2 reinstall mib510,/dev/ttyS0
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ MIB510='/dev/ttys4' make mica2 install.0 mib510
> mkdir -p build/mica2
>     compiling ActiveAppC to a mica2 binary
> ncc -o build/mica2/main.exe -Os -DCC1K_DEF_FREQ=916700000 
> -finline-limit=100000 -Wall -Wshadow -Wnesc-all -target=mica2 
> -fnesc-cfile=build/mica2/app.c -board=micasb  -fnesc-dump=wiring 
> -fnesc-dump='interfaces(
> !abstract())' -fnesc-dump='referenced(interfacedefs, components)' 
> -fnesc-dumpfile=build/mica2/wiring-check.xml ActiveAppC.nc -lm
>     compiled ActiveAppC to build/mica2/main.exe
>            11380 bytes in ROM
>              308 bytes in RAM
> avr-objcopy --output-target=srec build/mica2/main.exe build/mica2/main.srec
> avr-objcopy --output-target=ihex build/mica2/main.exe build/mica2/main.ihex
>     writing TOS image
> tos-set-symbols build/mica2/main.srec build/mica2/main.srec.out-0 
> TOS_NODE_ID=0 ActiveMessageAddressC$addr=0
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out-0
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ make mica2 reinstall mib510,/dev/tty3
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ make mica2 reinstall mib510,/dev/tty2
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ make mica2 reinstall mib510,/dev/tty3
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> Nicole Caruso at NicolesComputer /opt/tinyos-2.x/apps/Nicole_Jan_31/Active
> $ make mica2 reinstall mib510,/dev/tty0
> cp build/mica2/main.srec build/mica2/main.srec.out
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS3 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out
> Error: No such file or directory
>  -> /dev/ttyS3
> make: *** [program] Error 1
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

-- 
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew



More information about the Tinyos-help mailing list