[Tinyos-help] usb in telosb

nilanb at cs.umass.edu nilanb at cs.umass.edu
Wed Sep 14 10:33:54 PDT 2005


Hi,
I have a problem with the transferring data  over the usb in telosb motes. It
seems that after transferring data for some time ( using serial forwarder) over
the usb the mote doesnot receive any more data. Well, the leds which shows that
the data is being received by the mote blinks. However the TinyOS program stops
receiving the message. This happens only after I have used the usb for some
period of time for data transfer.
Is there any way around this ?
Thanks in advance for the help,
Nilanjan

Quoting tinyos-help-request at Millennium.Berkeley.EDU:

> Send Tinyos-help mailing list submissions to
> 	tinyos-help at Millennium.Berkeley.EDU
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> 
> or, via email, send a message with subject or body 'help' to
> 	tinyos-help-request at Millennium.Berkeley.EDU
> 
> You can reach the person managing the list at
> 	tinyos-help-owner at Millennium.Berkeley.EDU
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Tinyos-help digest..."
> 
> 
> Today's Topics:
> 
>    1. what fuse bits for mica2 (Mark Calder)
>    2. please hepl me! (? ?)
>    3. compile error when I build SurgeTelos to a pc library (yicheng)
>    4. Re: compile error when I build SurgeTelos to a pc	library
>       (Kristin Wright)
>    5. Re: Compile problems: undefined reference to main (Kristin Wright)
>    6. Re: Hello,,,need help (Kristin Wright)
>    7. Re: TinyOS help (Kristin Wright)
>    8. RE: compile error when I build SurgeTelos to a pc	library
>       (yicheng)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Tue, 13 Sep 2005 21:55:02 +1000
> From: Mark Calder <m.calder at crcmining.com.au>
> Subject: [Tinyos-help] what fuse bits for mica2
> To: tinyos-help at Millennium.Berkeley.EDU
> Message-ID: <4326BE16.3070002 at crcmining.com.au>
> Content-Type: text/plain; charset=us-ascii; format=flowed
> 
> Is this the right fuse bits for a mica2 and jtag debugging?
> 
> AVaRICE version 2.3, Sep 13 2005 16:12:45
> 
> Defaulting JTAG bitrate to 1 MHz. Make sure that the target
> frequency is at least 4 MHz or you will likely encounter failures
> controlling the target.
> 
> JTAG config starting.
> Hardware Version: 0xce
> Software Version: 0x7f
> Reported JTAG device ID: 0x9702
> Configured for device ID: 0x9702 atmega128
> JTAG config complete.
> 
> Reading Fuse Bytes:
>    Extended Fuse byte -> 0xff
>        High Fuse byte -> 0x19
>         Low Fuse byte -> 0xff
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 12 Sep 2005 21:54:05 +0800
> From: ? ? <newish21 at hotmail.com>
> Subject: [Tinyos-help] please hepl me!
> To: tinyos-help at Millennium.Berkeley.EDU
> Message-ID: <BAY12-F25FB33BD09C6225D8C5EB1C29D0 at phx.gbl>
> Content-Type: text/plain; charset=gb2312; format=flowed
> 
> Hi,
>  
> I installed the windows version of TOSSIM with cygwin. I am able to run the 
> tossim command:
> DBG=led ./opt/tinyos-1.x/apps/Blink/build/pc/main.exe 3
>  
> But, TinyViz does not work properly. The GUI comes up and then closes after 
> a second and I get this error.
> $ DBG=led ./tinyviz -run /opt/tinyos-1.x/apps/Blink/build/pc/main.exe 3
> AUTORUN: Initializing simulation.
> AUTORUN: Running simulation: /opt/tinyos-1.x/apps/Blink/build/pc/main.exe 
> -gui -r=lossy 3
> AUTORUN: Unable to run simulation: java.io.IOException: CreateProcess: 
> /opt/tinyos-1.x/apps/Blink/build/pc/main.exe -gui -r=lossy 3 error=3
> Goodbye!
>  
> Can you help me out with this. Thanks.
> 
> _________________________________________________________________
> ÓëÁª»úµÄÅóÓѽøÐн»Á÷£¬ÇëʹÓà MSN Messenger:  http://messenger.msn.com/cn  
> 
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Wed, 14 Sep 2005 10:07:24 -0500
> From: "yicheng" <y-jie at northwestern.edu>
> Subject: [Tinyos-help] compile error when I build SurgeTelos to a pc
> 	library
> To: <tinyos-help at Millennium.Berkeley.EDU>
> Message-ID: <20050914150708.C985411A at lulu.it.northwestern.edu>
> Content-Type: text/plain;	charset="us-ascii"
> 
> Hi All,
> 
> When I'm using 'make pc' to build 'SurgeTelos' to a pc library in TinyOS
> version 1.1.14, I get such errors, Can anyone tell me why it happens?
> 
> $ make pc
> mkdir -p build/pc
>     compiling Surge to a pc binary
> ncc -o build/pc/main.exe -g -O0 -I%T/lib/MultiHopLQI -DSEND_QUEUE_SIZE=8
> -DMHOP_LEDS -pthread -fnesc-nido-tosnodes=1000 -fnesc-simulate -Wall
> -Wshadow -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=pc
> -fnesc-cfile=build/pc/app.c -board=micasb -I%T/lib/Deluge -I%T/lib/Flash
> -I%T/lib/Flash/STM25P -DDEFAULT_EEPROM_SIZE=0x100000
> -DIDENT_PROGRAM_NAME=\"Surge\" -DIDENT_USER_ID=\"yjia\"
> -DIDENT_HOSTNAME=\"runningTmote\" -DIDENT_USER_HASH=0xc4f31e66L
> -DIDENT_UNIX_TIME=0x4328348aL -DIDENT
> _UID_HASH=0xfd3b12c1L Surge.nc -lm
> SurgeM.nc:47: interface CC2420Control not found
> SurgeM.nc:48: interface MacControl not found
> SurgeM.nc: In function `StdControl.start':
> SurgeM.nc:117: interface has no command or event named `SetRFPower'
> SurgeM.nc:118: interface has no command or event named `enableAck'
> Surge.nc: At top level:
> Surge.nc:51: component CC2420RadioC not found
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc: In
> function `ReceiveMsg.receive':
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:320
> : structure has no member named `lqi'
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:343
> : structure has no member named `lqi'
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:352
> : st
> ructure has no member named `lqi'
> Surge.nc: At top level:
> Surge.nc:73: cannot find `CC2420Control'
> Surge.nc:74: cannot find `MacControl'
> make: *** [exe0] Error 1
> 
> Thanks in advance for your help!
> Yicheng
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Wed, 14 Sep 2005 09:23:30 -0600
> From: Kristin Wright <l.kristin.wright at gmail.com>
> Subject: Re: [Tinyos-help] compile error when I build SurgeTelos to a
> 	pc	library
> To: yicheng <y-jie at northwestern.edu>
> Cc: tinyos-help at millennium.berkeley.edu
> Message-ID: <cc4b99fe050914082350b0c944 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Hi --
> 
> SurgeTelos has components which aren't  implemented for the pc
> platform. You can ensure that this is the case by checking the
> components under tos/platform/pc.
> 
> -kw
> 
> 
> On 9/14/05, yicheng <y-jie at northwestern.edu> wrote:
> > Hi All,
> > 
> > When I'm using 'make pc' to build 'SurgeTelos' to a pc library in TinyOS
> > version 1.1.14, I get such errors, Can anyone tell me why it happens?
> > 
> > $ make pc
> > mkdir -p build/pc
> >     compiling Surge to a pc binary
> > ncc -o build/pc/main.exe -g -O0 -I%T/lib/MultiHopLQI -DSEND_QUEUE_SIZE=8
> > -DMHOP_LEDS -pthread -fnesc-nido-tosnodes=1000 -fnesc-simulate -Wall
> > -Wshadow -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=pc
> > -fnesc-cfile=build/pc/app.c -board=micasb -I%T/lib/Deluge -I%T/lib/Flash
> > -I%T/lib/Flash/STM25P -DDEFAULT_EEPROM_SIZE=0x100000
> > -DIDENT_PROGRAM_NAME=\"Surge\" -DIDENT_USER_ID=\"yjia\"
> > -DIDENT_HOSTNAME=\"runningTmote\" -DIDENT_USER_HASH=0xc4f31e66L
> > -DIDENT_UNIX_TIME=0x4328348aL -DIDENT
> > _UID_HASH=0xfd3b12c1L Surge.nc -lm
> > SurgeM.nc:47: interface CC2420Control not found
> > SurgeM.nc:48: interface MacControl not found
> > SurgeM.nc: In function `StdControl.start':
> > SurgeM.nc:117: interface has no command or event named `SetRFPower'
> > SurgeM.nc:118: interface has no command or event named `enableAck'
> > Surge.nc: At top level:
> > Surge.nc:51: component CC2420RadioC not found
> > C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:
> In
> > function `ReceiveMsg.receive':
> >
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:320
> > : structure has no member named `lqi'
> >
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:343
> > : structure has no member named `lqi'
> >
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:352
> > : st
> > ructure has no member named `lqi'
> > Surge.nc: At top level:
> > Surge.nc:73: cannot find `CC2420Control'
> > Surge.nc:74: cannot find `MacControl'
> > make: *** [exe0] Error 1
> > 
> > Thanks in advance for your help!
> > Yicheng
> > 
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
> 
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Wed, 14 Sep 2005 09:27:34 -0600
> From: Kristin Wright <l.kristin.wright at gmail.com>
> Subject: Re: [Tinyos-help] Compile problems: undefined reference to
> 	main
> To: Kenneth Lima <kglima at yahoo.com>
> Cc: tinyos-help at millennium.berkeley.edu
> Message-ID: <cc4b99fe05091408271cfcce8 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> It looks as if the whole tinyos infrastructure isn't getting included
> (which defines main for you among other things. If you have a version
> of tinyos >= 1.1.11,  be sure that your MAKERULES is defined to point
> at $TOSROOT/tools/make.
> 
> Try the above. If you include the otuput of 'toscheck', it would be helpful.
> 
> 
> -kw
> 
> On 9/14/05, Kenneth Lima <kglima at yahoo.com> wrote:
> > Hi all, 
> >   
> > i just started programming with Nesc and tinyOS and i am trying to create
> > some PWM code for my AVR Atmega 128 Microcontroller. I first receive the
> > warning 
> >   
> > /usr/local/lib/gcc-lib/avr/3.3-tinyos/../../../../avr/lib/avr5/crtm128.o:
> > in function `__bad_interrupt´´: 
> > and then the error 
> > ../../../crt1/gcrt1.S:99: undefined reference to `main´ 
> >   
> >   
> > I already used  "include ../Makerules" in my makefile. Has anyone
> > encountered this before. Any help will be of great help. 
> >   
> > Thanks 
> >   
> > This is how my code looks like : 
> >   
> > /*********************** TxRxControllerM.nc
> > *************************************/ 
> > includes sensorboard;   
> > module TxRxControllerM {
> >   provides interface StdControl;
> >  
> >   uses interface StdControl as USoundTxrControl;
> >   uses interface UltrasoundTransmit;
> >   uses interface Timer;
> >   uses interface Leds;
> > } 
> > implementation {
> >   
> >  command result_t StdControl.init(){
> >    call USoundTxrControl.init(); 
> >    return SUCCESS;
> >   } 
> >   command result_t StdControl.start(){
> >           call Leds.redOff();    
> >           sbi(EICRA, ISC01);
> >           sbi(EICRA, ISC00);  // Rising edge of INT0 generates an
> interrupt
> >           sbi(EIMSK,INT0) ;   // External inerrupt enable INT0 (PE4)
> >           return SUCCESS;
> >   }
> >   
> >   command result_t StdControl.stop(){
> >         cbi(EIMSK,INT0) ;   // disable interrupt enable INT0  
> >         call USoundTxrControl.stop();
> >  return SUCCESS;
> >   }
> >  
> >   
> >   event result_t Timer.fired(){
> >     return SUCCESS;
> >   } 
> > 
> >   
> >   TOSH_SIGNAL(SIG_INTERRUPT0) { /* Debouncing */
> >     __nesc_enable_interrupt();  
> >           call Leds.redOff();
> >           call UltrasoundTransmit.sendUltrasoundPulse(10);
> > // Send 10 pulses     
> >   } 
> > } 
> >   
> >  
> > /*********************** TxRxControllerC.nc
> > *************************************/ 
> > configuration TxRxControllerC
> > {
> >   provides interface StdControl;
> > } 
> > implementation
> > {
> >  components TxRxControllerM, USoundTxrC,  LedsC as Leds, TimerC; 
> >   StdControl = TxRxControllerM;
> >   StdControl = TimerC; 
> >   TxRxControllerM.USoundTxrControl->USoundTxrC.StdControl;
> >   TxRxControllerM.UltrasoundTransmit->USoundTxrC;
> >   TxRxControllerM.Leds -> Leds;
> >   TxRxControllerM.Timer -> TimerC.Timer[unique("Timer")];
> > } 
> >   
> > /*********************** USoundTxrM.nc ***********************/ 
> >   
> > includes sensorboard; 
> > module USoundTxrM {
> >   provides interface StdControl;
> >   provides interface UltrasoundTransmit;
> > }
> > implementation 
> > {
> >   command result_t StdControl.init() {
> >     TOSH_MAKE_USOUND_TXR_CTL_OUTPUT();     /* DDRC =
> > _BV(PC1); -- PWM output */
> >  
> >     dbg(DBG_BOOT, "ULTRASOUND transmitter initialized.\n");
> >     return SUCCESS;
> >   } 
> >   command result_t StdControl.start() {
> >  
> >     return SUCCESS;
> >   } 
> >   command result_t StdControl.stop() { 
> >    return SUCCESS;
> >   } 
> >   //this resonates the ultrasound transmitter at 25usec pulses  (40Khz)  
> > command result_t
> > UltrasoundTransmit.sendUltrasoundPulse(uint8_t numPulses)
> >   {
> >  while(numPulses > 0) {
> >    TOSH_SET_USOUND_TXR_CTL_PIN(); //PC1=1;
> >    TOSH_uwait(25);
> >    asm volatile ("nop" ::);
> >    TOSH_CLR_USOUND_TXR_CTL_PIN(); //PC1=0;
> >    TOSH_uwait(24);
> >    asm volatile ("nop" ::);
> >    asm volatile ("nop" ::);
> >   numPulses--;
> >  }
> >         return SUCCESS;
> >   }
> > } 
> >   
> > /*************************************USoundTxrC.nc
> > *************************/
> > includes sensorboard; 
> > configuration USoundTxrC
> > {
> >   provides interface StdControl;
> >   provides interface UltrasoundTransmit;
> > } 
> > implementation
> > {
> >   components USoundTxrM; 
> >   StdControl = USoundTxrM;
> >   UltrasoundTransmit = USoundTxrM;
> > }
> >  
> >   
> > Thanks in advance 
> > Kenneth 
> >  
> > 
> > This world is no fun!!!!
> > 
> >  ________________________________
> > Yahoo! for Good
> >  Click here to donate to the Hurricane Katrina relief effort. 
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> > 
> > 
> >
> 
> 
> 
> ------------------------------
> 
> Message: 6
> Date: Wed, 14 Sep 2005 09:30:02 -0600
> From: Kristin Wright <l.kristin.wright at gmail.com>
> Subject: Re: [Tinyos-help] Hello,,,need help
> To: H Raghu-in1467c <in1467c at motorola.com>
> Cc: tinyos-help at millennium.berkeley.edu
> Message-ID: <cc4b99fe050914083059419a9b at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Please send the full output of your rpm install. 
> -kw
> 
> On 9/12/05, H Raghu-in1467c <in1467c at motorola.com> wrote:
> >  
> > Hello Everyone, 
> > I am project trainee and I am using TinyOs for developing sensor based
> > application using cricket v2 tool kit 
> > The platform I am operating is Red Hat 9, 
> > There is one problem during installation of Tinyos and its associated
> > modules,,,,I lot of errors during tinyos-1.1*-noarch.rpm 
> > Any help will be appreciated 
> > Thanks for reading 
> > Thank you Raghu 
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> > 
> > 
> >
> 
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Wed, 14 Sep 2005 09:33:42 -0600
> From: Kristin Wright <l.kristin.wright at gmail.com>
> Subject: Re: [Tinyos-help] TinyOS help
> To: munirul haque <msunny1535 at yahoo.com>
> Cc: tinyos-help at millennium.berkeley.edu
> Message-ID: <cc4b99fe050914083357af2c0b at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Try your chosen platform's Getting Started Guide (for telos, see
> www.moteiv.com; for mica* see www.xbow.com). After reading that, try
> the tutorials but use the compilation/installation techniques listed
> in the Getting Started Guide -- the tutorials are out-of-date with
> respect to those and some other things.
> 
> -kw
> 
> On 9/13/05, munirul haque <msunny1535 at yahoo.com> wrote:
> > Dear all,
> > 
> > i just want to extend my research area to sensor
> > networks.
> > i have just installed TinyOS.
> > what to do next??
> > platform(telos,mica2,mica),sensor boards,mote where
> > they are situated and how they are interconnected?
> > 
> > Md. Munirul Haque
> > Graduate Student
> > Marquette University
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
> 
> 
> 
> ------------------------------
> 
> Message: 8
> Date: Wed, 14 Sep 2005 10:36:38 -0500
> From: "yicheng" <y-jie at northwestern.edu>
> Subject: RE: [Tinyos-help] compile error when I build SurgeTelos to a
> 	pc	library
> To: <kwright at cs.berkeley.edu>
> Cc: tinyos-help at millennium.berkeley.edu
> Message-ID: <20050914153622.5584B148 at lulu.it.northwestern.edu>
> Content-Type: text/plain;	charset="us-ascii"
> 
> Hi Kristin,
> 
> Thanks for your information, how could I do if I want to run SurgeTelos
> program on TOSSIM? Is there schedule that these components will be
> implemented in the near future?
> 
> B.R.
> Yicheng
> 
> -----Original Message-----
> From: Kristin Wright [mailto:l.kristin.wright at gmail.com] 
> Sent: Wednesday, September 14, 2005 10:24 AM
> To: yicheng
> Cc: tinyos-help at millennium.berkeley.edu
> Subject: Re: [Tinyos-help] compile error when I build SurgeTelos to a pc
> library
> 
> Hi --
> 
> SurgeTelos has components which aren't  implemented for the pc
> platform. You can ensure that this is the case by checking the
> components under tos/platform/pc.
> 
> -kw
> 
> 
> On 9/14/05, yicheng <y-jie at northwestern.edu> wrote:
> > Hi All,
> > 
> > When I'm using 'make pc' to build 'SurgeTelos' to a pc library in TinyOS
> > version 1.1.14, I get such errors, Can anyone tell me why it happens?
> > 
> > $ make pc
> > mkdir -p build/pc
> >     compiling Surge to a pc binary
> > ncc -o build/pc/main.exe -g -O0 -I%T/lib/MultiHopLQI -DSEND_QUEUE_SIZE=8
> > -DMHOP_LEDS -pthread -fnesc-nido-tosnodes=1000 -fnesc-simulate -Wall
> > -Wshadow -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=pc
> > -fnesc-cfile=build/pc/app.c -board=micasb -I%T/lib/Deluge -I%T/lib/Flash
> > -I%T/lib/Flash/STM25P -DDEFAULT_EEPROM_SIZE=0x100000
> > -DIDENT_PROGRAM_NAME=\"Surge\" -DIDENT_USER_ID=\"yjia\"
> > -DIDENT_HOSTNAME=\"runningTmote\" -DIDENT_USER_HASH=0xc4f31e66L
> > -DIDENT_UNIX_TIME=0x4328348aL -DIDENT
> > _UID_HASH=0xfd3b12c1L Surge.nc -lm
> > SurgeM.nc:47: interface CC2420Control not found
> > SurgeM.nc:48: interface MacControl not found
> > SurgeM.nc: In function `StdControl.start':
> > SurgeM.nc:117: interface has no command or event named `SetRFPower'
> > SurgeM.nc:118: interface has no command or event named `enableAck'
> > Surge.nc: At top level:
> > Surge.nc:51: component CC2420RadioC not found
> > C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:
> In
> > function `ReceiveMsg.receive':
> >
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:320
> > : structure has no member named `lqi'
> >
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:343
> > : structure has no member named `lqi'
> >
> C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/lib/MultiHopLQI/MultiHopLQI.nc:352
> > : st
> > ructure has no member named `lqi'
> > Surge.nc: At top level:
> > Surge.nc:73: cannot find `CC2420Control'
> > Surge.nc:74: cannot find `MacControl'
> > make: *** [exe0] Error 1
> > 
> > Thanks in advance for your help!
> > Yicheng
> > 
> > _______________________________________________
> > Tinyos-help mailing list
> > Tinyos-help at Millennium.Berkeley.EDU
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
> 
> 
> 
> ------------------------------
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at Millennium.Berkeley.EDU
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> 
> 
> End of Tinyos-help Digest, Vol 29, Issue 38
> *******************************************
> 




-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/


More information about the Tinyos-help mailing list